View STP95N4F3_7605726.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

december 2011 doc id 13288 rev 4 1/20 20 stb95n4f3, std95n4f3 STP95N4F3 n-channel 40 v, 5.0 m , 80 a stripfet? iii power mosfet in d2pak, dpak, to-220 features standard threshold drive 100% avalanche tested applications switching applications ? automotive description these devices are n-channel enhancement mode power mosfets produced using stmicroelectronics? stripfet? iii technology, which is specifically designed to minimize on- resistance and gate charge to provide superior switching performance. figure 1. internal schematic diagram order codes v dss r ds(on) max. i d pw stb95n4f3 40 v < 5.8 m 80 a 110 w std95n4f3 STP95N4F3 < 6.2 m dpak to-220 d2pak 1 3 ta b 1 3 tab 1 2 3 ta b !-v $4!"or ' 3 table 1. device summary order codes marking package packaging stb95n4f3 95n4f3 d2pak tape and reel std95n4f3 95n4f3 dpak STP95N4F3 95n4f3 to-220 tube www.st.com
contents stb95n4f3, std95n4f3, STP95N4F3 2/20 doc id 13288 rev 4 contents 1 electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 3 test circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 4 package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 5 packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 6 revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
stb95n4f3, std95n4f3, STP95N4F3 electrical ratings doc id 13288 rev 4 3/20 1 electrical ratings table 2. absolute maximum ratings symbol parameter value unit v ds drain-source voltage 40 v v gs gate-source voltage 20 v i d (1) 1. current limited by package. drain current (continuous) at t c = 25 c 80 a i d drain current (continuous) at t c = 100 c 65 a i dm (2) 2. pulse width limited by safe operating area. drain current (pulsed) 320 a p tot total dissipation at t c = 25 c 110 w derating factor 0.73 w/c dv/dt (3) 3. i sd 80 a, di/dt 400a/s, v ds v (br)dss , tj tjmax. peak diode recovery voltage slope 8 v/ns e as (4) 4. starting tj = 25 c, i d = 40 a, v dd = 30 v. single pulse avalanche energy 400 mj t j t stg operating junction temperature storage temperature -55 to 175 c table 3. thermal resistance symbol parameter value unit d2pak dpak to-220 r thj-case thermal resistance junction-case max 1.36 c/w r thj-a thermal resistance junction-ambient max 62.5 c/w r thj-pcb (1) 1. when mounted on 1inch2 fr-4 2oz cu board. thermal resistance junction-ambient max 30 50 c/w t l maximum lead temperature for soldering purpose 300 c
electrical characteristics stb95n4f3, std95n4f3, STP95N4F3 4/20 doc id 13288 rev 4 2 electrical characteristics (t case =25 c unless otherwise specified) table 4. static symbol parameter test conditions min. typ. max. unit v (br)dss drain-source breakdown voltage i d = 250 a, v gs = 0 40 v i dss zero gate voltage drain current (v gs = 0) v ds = 40 v, v ds = 40 v,tc = 125 c 10 100 a a i gss gate body leakage current (v ds = 0) v gs = 20 v 200 na v gs(th) gate threshold voltage v ds = v gs , i d = 250 a 2 4 v r ds(on) static drain-source on resistance v gs = 10 v, i d = 40 a 5.0 5.8 m v gs = 10 v, i d = 40 a for to-220 5.4 6.2 m table 5. dynamic symbol parameter test conditions min. typ. max. unit c iss c oss c rss input capacitance output capacitance reverse transfer capacitance v ds =25 v, f=1 mhz, v gs =0 - 2200 580 40 pf pf pf q g q gs q gd total gate charge gate-source charge gate-drain charge v dd =20 v, i d = 80 a v gs =10 v (see figure 14 ) - 40 11 8 54 nc nc nc
stb95n4f3, std95n4f3, STP95N4F3 electrical characteristics doc id 13288 rev 4 5/20 table 6. switching on/off (inductive load) symbol parameter test conditions min. typ. max. unit t d(on) t r turn-on delay time rise time v dd =20 v, i d = 40 a, r g =4.7 , v gs =10 v (see figure 16 ) - 15 50 - ns ns t d(off) t f turn-off delay time fall time v dd =20 v, i d = 40 a, r g =4.7 , v gs =10 v (see figure 16 ) - 40 15 - ns ns table 7. source drain diode symbol parameter test conditions min. typ. max. unit i sd i sdm (1) 1. pulse width limited by safe operating area source-drain current source-drain current (pulsed) - 80 320 a a v sd (2) 2. pulsed: pulse duration = 300 s, duty cycle 1.5% forward on voltage i sd =80 a, v gs =0 - 1.5 v t rr q rr i rrm reverse recovery time reverse recovery charge reverse recovery current i sd =80 a, di/dt = 100 a/s, v dd = 30 v, tj=150 c (see figure 15 ) - 45 60 2.8 ns nc a
electrical characteristics stb95n4f3, std95n4f3, STP95N4F3 6/20 doc id 13288 rev 4 2.1 electrical characteristics (curves) figure 2. safe operating area figure 3. thermal impedance figure 4. output characteristics figure 5. transfer characteristics figure 6. static drain-source on resistance figure 7. normalized bvdss vs temperature r d s (on) 6.0 5.5 5.0 4.5 0 40 i d (a) (m ) 20 60 6.5 i d =40a v g s =10v to-220 dpak, d2pak 8 0 hv29000
stb95n4f3, std95n4f3, STP95N4F3 electrical characteristics doc id 13288 rev 4 7/20 figure 8. gate charge vs gate-source voltage figure 9. capacitance variations figure 10. normalized gate threshold voltage vs temperature figure 11. normalized on resistance vs temperature figure 12. source-drain diode forward characteristics
test circuits stb95n4f3, std95n4f3, STP95N4F3 8/20 doc id 13288 rev 4 3 test circuits figure 13. switching times test circuit for resistive load figure 14. gate charge test circuit figure 15. test circuit for inductive load switching and diode recovery times figure 16. unclamped inductive load test circuit figure 17. unclamped inductive waveform figure 18. switching time waveform am0146 8 v1 v g s p w v d r g r l d.u.t. 2200 f 3 . 3 f v dd am01469v1 v dd 47k 1k 47k 2.7k 1k 12v v i =20v=v gmax 2200 f p w i g =con s t 100 100nf d.u.t. v g am01470v1 a d d.u.t. s b g 25 a a b b r g g fa s t diode d s l=100 h f 3 . 3 1000 f v dd am01471v1 v i p w v d i d d.u.t. l 2200 f 3 . 3 f v dd am01472v1 v (br)d ss v dd v dd v d i dm i d am0147 3 v1 v d s t on td on td off t off t f t r 90 % 10 % 10 % 0 0 90 % 90 % 10 % v g s
stb95n4f3, std95n4f3, STP95N4F3 package mechanical data doc id 13288 rev 4 9/20 4 package mechanical data in order to meet environmental requirements, st offers these devices in different grades of ecopack ? packages, depending on their level of environmental compliance. ecopack ? specifications, grade definitions and product status are available at: www.st.com. ecopack is an st trademark.
package mechanical data stb95n4f3, std95n4f3, STP95N4F3 10/20 doc id 13288 rev 4 table 8. d2pak (to-263) mechanical data dim. mm min. typ. max. a4.40 4.60 a1 0.03 0.23 b0.70 0.93 b2 1.14 1.70 c0.45 0.60 c2 1.23 1.36 d8.95 9.35 d1 7.50 e 10 10.40 e1 8.50 e2.54 e1 4.88 5.28 h 15 15.85 j1 2.49 2.69 l2.29 2.79 l1 1.27 1.40 l2 1.30 1.75 r0.4 v2 0 8
stb95n4f3, std95n4f3, STP95N4F3 package mechanical data doc id 13288 rev 4 11/20 figure 19. d2pak (to-263) drawing figure 20. d2pak footprint (a) a. all dimension are in millimeters 0079457_ s 16.90 12.20 9.75 3 .50 5.0 8 1.60 footprint
package mechanical data stb95n4f3, std95n4f3, STP95N4F3 12/20 doc id 13288 rev 4 table 9. dpak (to-252) mechanical data dim. mm min. typ. max. a2.20 2.40 a1 0.90 1.10 a2 0.03 0.23 b0.64 0.90 b4 5.20 5.40 c0.45 0.60 c2 0.48 0.60 d6.00 6.20 d1 5.10 e6.40 6.60 e1 4.70 e2.28 e1 4.40 4.60 h 9.35 10.10 l1 1.50 l1 2.80 l2 0.80 l4 0.60 1 r0.20 v2 0 8
stb95n4f3, std95n4f3, STP95N4F3 package mechanical data doc id 13288 rev 4 13/20 figure 21. dpak (to-252) drawing figure 22. dpak footprint (b) b. all dimension are in millimeters 006 8 772_h 6.7 1.6 1.6 2. 3 2. 3 6.7 1. 8 3 am0 88 50v1
package mechanical data stb95n4f3, std95n4f3, STP95N4F3 14/20 doc id 13288 rev 4 table 10. to-220 type a mechanical data dim. mm min. typ. max. a4.40 4.60 b0.61 0.88 b1 1.14 1.70 c0.48 0.70 d 15.25 15.75 d1 1.27 e 10 10.40 e2.40 2.70 e1 4.95 5.15 f1.23 1.32 h1 6.20 6.60 j1 2.40 2.72 l13 14 l1 3.50 3.93 l20 16.40 l30 28.90 ? p3.75 3.85 q2.65 2.95
stb95n4f3, std95n4f3, STP95N4F3 package mechanical data doc id 13288 rev 4 15/20 figure 23. to-220 type a drawing 00159 88 _typea_rev_ s
packaging mechanical data stb95n4f3, std95n4f3, STP95N4F3 16/20 doc id 13288 rev 4 5 packaging mechanical data table 11. d2pak (to-263) tape and reel mechanical data tape reel dim. mm dim. mm min. max. min. max. a0 10.5 10.7 a 330 b0 15.7 15.9 b 1.5 d 1.5 1.6 c 12.8 13.2 d1 1.59 1.61 d 20.2 e 1.65 1.85 g 24.4 26.4 f 11.4 11.6 n 100 k0 4.8 5.0 t 30.4 p0 3.9 4.1 p1 11.9 12.1 base qty 1000 p2 1.9 2.1 bulk qty 1000 r50 t 0.25 0.35 w 23.7 24.3
stb95n4f3, std95n4f3, STP95N4F3 packaging mechanical data doc id 13288 rev 4 17/20 table 12. dpak (to-252) tape and reel mechanical data tape reel dim. mm dim. mm min. max. min. max. a0 6.8 7 a 330 b0 10.4 10.6 b 1.5 b1 12.1 c 12.8 13.2 d 1.5 1.6 d 20.2 d1 1.5 g 16.4 18.4 e 1.65 1.85 n 50 f 7.4 7.6 t 22.4 k0 2.55 2.75 p0 3.9 4.1 base qty. 2500 p1 7.9 8.1 bulk qty. 2500 p2 1.9 2.1 r40 t 0.25 0.35 w 15.7 16.3
packaging mechanical data stb95n4f3, std95n4f3, STP95N4F3 18/20 doc id 13288 rev 4 figure 24. tape figure 25. reel p1 a0 d1 p0 f w e d b0 k0 t u s er direction of feed p2 10 pitche s c u m u l a tive toler a nce on t a pe +/- 0.2 mm u s er direction of feed r bending r a di us top cover t a pe am0 88 52v2 a d b f u ll r a di us g me asu red a t h ub c n reel dimen s ion s 40mm min. acce ss hole at s lot loc a tion t t a pe s lot in core for t a pe s t a rt 25 mm min. width am0 88 51v2
stb95n4f3, std95n4f3, STP95N4F3 revision history doc id 13288 rev 4 19/20 6 revision history table 13. dcument revision history date revision changes 22-feb-2007 1 first release 15-may-2007 2 changes on applications 10-sep-2009 3 removed package, mechanical data: ipak 13-dec-2011 4 new package and mechanical data have been added: ? table 8: d2pak (to-263) mechanical data , figure 19: d2pak (to-263) drawing , figure 20: d2pak footprint section 5: packaging mechanical data has been updated: ? table 11: d2pak (to-263) tape and reel mechanical data , figure 24: tape , figure 25: reel . minor text changes.
stb95n4f3, std95n4f3, STP95N4F3 20/20 doc id 13288 rev 4 please read carefully: information in this document is provided solely in connection with st products. stmicroelectronics nv and its subsidiaries (?st ?) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described he rein at any time, without notice. all st products are sold pursuant to st?s terms and conditions of sale. purchasers are solely responsible for the choice, selection and use of the st products and services described herein, and st as sumes no liability whatsoever relating to the choice, selection or use of the st products and services described herein. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. i f any part of this document refers to any third party products or services it shall not be deemed a license grant by st for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoev er of such third party products or services or any intellectual property contained therein. unless otherwise set forth in st?s terms and conditions of sale st disclaims any express or implied warranty with respect to the use and/or sale of st products including without limitation implied warranties of merchantability, fitness for a particular purpose (and their equivalents under the laws of any jurisdiction), or infringement of any patent, copyright or other intellectual property right. unless expressly approved in writing by two authorized st representatives, st products are not recommended, authorized or warranted for use in military, air craft, space, life saving, or life sustaining applications, nor in products or systems where failure or malfunction may result in personal injury, death, or severe property or environmental damage. st products which are not specified as "automotive grade" may only be used in automotive applications at user?s own risk. resale of st products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by st for the st product or service described herein and shall not create or extend in any manner whatsoev er, any liability of st. st and the st logo are trademarks or register ed trademarks of st in various countries. information in this document supersedes and replaces all information previously supplied. the st logo is a registered trademark of stmicroelectronics. all other names are the property of their respective owners. ? 2011 stmicroelectronics - all rights reserved stmicroelectronics group of companies australia - belgium - brazil - canada - china - czech republic - finland - france - germany - hong kong - india - israel - ital y - japan - malaysia - malta - morocco - philippines - singapore - spain - sweden - switzerland - united kingdom - united states of america www.st.com

▲Up To Search▲

Price & Availability of STP95N4F3

	To Download STP95N4F3 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .